Sudden Hot Water System Failure: How to Do Immediately Now
Sudden Hot Water System Failure: How to Do Immediately Now
Blog Article
What are your thoughts on How to Troubleshoot and Repair an Electric Water Heater?
Several contemporary houses make use of an electric hot water heater for their heating system, because of its ease as well as convenience of use. Nonetheless, just like any other electric appliances, problems may emerge with its use, unexpectedly. It can be truly aggravating to awaken to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient or even too warm. Whatever the instance might be, water heater troubles can be quite stressful. The good news is, we have actually made a checklist of possible options to your hot water heater problems. There are a number of elements that could cause a lot of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the major power supply for security. Whatever the problem is, getting it fixed must not pose way too much of an issue if you comply with these actions:
Check Your Power Supply:
As standard as this might seem, it is really required. Without appropriate power, your water heater will not operate. So the first thing to do when your water suddenly retires is to confirm that it isn't a power problem. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, merely transform it on and off once more. Change any kind of broken or damaged fuse. Test the device with power after these adjustments to see if it's currently functioning.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, after that attempt checking out your heating element if it is still functioning. Evaluate each of your heating elements to make sure the issue isn't with any of them. If any of them is faulty, change that part and then examine whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to inspect the temperature level setups on your top thermostat. Guarantee the circuit breaker is turned off before doing anything. Open the gain access to panel as well as press the red button for temperature reset over the thermostat. This should assist heat up the water. Transform the breaker back on and inspect if the problem has actually been fixed.
Call An Expert:
If after replacing all defective parts and resetting your temperature, the hot water heater still isn't functioning, you may need to call an expert plumber for a specialist viewpoint. The issue with your heating system could be that the hot and cold faucets have actually been switched over or it might be undersized for the amount of warm water needed in your house. Whatever the situation might be, an expert plumber would certainly assist fix the trouble.
Verdict
Hot water heater issues are not always major. Much of them result from small issues like a blown fuse or worn-out burner. Changing the malfunctioning parts ought to work. Nevertheless, if you are still incapable to fix the problem, give a call to your local plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our post on How to Troubleshoot and Repair an Electric Water Heater. Many thanks for taking a few minutes to read our short article. Sharing is good. Helping people is fun. Many thanks for taking the time to read it.
Schedule Free Estimate Report this page